Angle valve actuator for orifice hydraulic

drilling choke  

 

Orifice Choke Valve

 

Orifice Choke Valve is molded of two pieces of special carbon tungsten plates with rather ability of erosion resistance,one of which

rotates to alter the concentricity between the upper orifice and lower orifice of two plates so as to adjust the flow-rate of fluid or gas.

The valve is used for manifold such as drilling, fracture,mud circuit,ground high pressure gas injection/production, it has a outstanding

feature that the pressure difference between inlet and outlet,as closing, can press both of the plates fast together so as to put into effect

of sealing cutting,especially in the case that the pressure suddenly rises or flalls, the pre-set sign-rate of high/low pressure sensor can

be helpful for automatic closing /shut so as to avoid heavy accident.It is outstanding advantage that it has long working life and ability of

erosion/corrosion resistance in comparing with other choke valves.

 

 

Hydraulic orifice choke valve                                       

 

 

 

Control panel / Control Console for hydraulic orifice drilling choke   

 

 

 

Angle valve actuator for orifice hydraulic drilling choke        

 

 

 

Choke valve technical parameters                             

 

 Working Pressure: 2,000Psi-20,000PsT

·Nominal Bore Diameter: 1 13/16"-7 1/16"

·Working Medium: petroleum, natural gas ,water, mud, gas containing H2S, CO2

·Temperature Class: L-U

·Material Class: AA ~ HH

·Product Specification Level: 1~4

·Performance Requirement: 1-2

 

 

 Choke valve application