Angle valve actuator for orifice hydraulic
drilling choke
Orifice Choke Valve is molded of two pieces of special carbon tungsten plates with rather ability of erosion resistance,one of which
rotates to alter the concentricity between the upper orifice and lower orifice of two plates so as to adjust the flow-rate of fluid or gas.
The valve is used for manifold such as drilling, fracture,mud circuit,ground high pressure gas injection/production, it has a outstanding
feature that the pressure difference between inlet and outlet,as closing, can press both of the plates fast together so as to put into effect
of sealing cutting,especially in the case that the pressure suddenly rises or flalls, the pre-set sign-rate of high/low pressure sensor can
be helpful for automatic closing /shut so as to avoid heavy accident.It is outstanding advantage that it has long working life and ability of
erosion/corrosion resistance in comparing with other choke valves.
Control panel / Control Console for hydraulic orifice drilling choke
Angle valve actuator for orifice hydraulic drilling choke
Working Pressure: 2,000Psi-20,000PsT
·Nominal Bore Diameter: 1 13/16"-7 1/16"
·Working Medium: petroleum, natural gas ,water, mud, gas containing H2S, CO2
·Temperature Class: L-U
·Material Class: AA ~ HH
·Product Specification Level: 1~4
·Performance Requirement: 1-2
