5.1 Universal Type PullingTool is designed for running and retrieving downhole flowcontroldevices with external fishingnecks.
5.2 Type #SDPullingTool is a heavy duty pulling tool used to set or retrieve sub surface devices with an external fish neck from the #wellbore.
The SD #pullingtool is used when it is necessary to release from the
surface device by jarring downwards.
The #SDpulling tool has interchangeable cores to give the reach required.
5.3 Type #SUPullingTool is a heavy duty pulling tool used to set or retrieve sub surface devices with an external #fishneck from the well bore.
The SU #pulling_tool is used when it is necessary to release from the
surface device by jarring upwards.
The SU pulling tool has interchangeable cores to give the reach required.
5.4 Type #RPullingTool is designed to engage industry standard external #fishingneck on subsurface equipment and has the shear to release feature by jarring up to shear the pin.
It comes with 3 types of interchangeable core, which are RB, RS and RJ.
5.5 Type #SPullingTool is used to engage industry standard external #fishingneck on subsurface equipment and has the shear to release feature by jarring down to shear the pin.
#S_Type_Pulling_Tool comes with 3 types of core: SB, SM and SS.
5.6 Type #JDPullingTool is designed to engage and retrieve subsurface equipment with Jar-up to release feature and industry standard external fishing neck.
The tool comes with safety disconnect mechanism of shear to release by jarring down to shear the pin.
It comes with 3 types of core: JDC and JDS.
5.7 Type #JUPullingTool is designed to engage and retrieve subsurface equipment with #Jardown to release feature and industry standard external #fishingneck.
It has safety disconnect mechanism of shear to release by #jarringup to shear the pin.
The tool has 3 types of core: JUC and JUS.
5.8 Type #GSPullingTool is designed to engage various of #subsurface_equipment with industry standard internal #fishingneck.
Like lock mandrel has the shear to release feature by #jarringdown to shear the pin.
#Downward_jarring should be kept to minimal to avoid premature shearing.
For #jarring_up release function, please refer to Type #GRPullingTool.
5.9 #Heavy_Duty_GS_Pulling_Tool is designed to locate in standard internal fishing necks. Based on the standard
GS,the Heavy Duty GS has more dogs for increased bearing area and more robust cores for increased
strength.To engage the GS Pulling/Running Tool,a sit down weight is required fore automatic
engagement.To release the tool,downward jarring activates the release mechanism via the shear pin.
5.10 GU Shear Up Adapter converts the standard sheardown GS Pulling Tool and Heavy Duty GS Pulling
Tool into a shear-up release.To convert the GS Pulling Tools into a shear-up tool,remove the shear
pin and fish neck from the GS Tool and screw on the GU shear up adapter.
5.11 Heavy Duty Shear Up Adapter (as with the GU adapter) is a device used to convert a GS type pulling tool into a GR shear up to release type tool.
However,the heavy duty shear up adapter is designed for applications where it is desirable for the GR to endure some sustained heavy upward jars prior to
releasing,which is not possible with the standard GU adapter.The heavy duty shear up adapter is fitted with a double set of shear pins capable
of sustaining heavy upward jarring before shearing in two stages.In order to achieve the release of the GS pulling tool with the
shear pin removed,heavy duty jarring must be maintained in order to shear out the double set of shear pins.
5.12 Double Jar Down Adapter is designed to add greater flexibility to the GS Pulling tool.The Double Jar Down adapter protects the GS pulling tool shear pin.This
allows the GS Pulling tool to be first jarred downwards without shearing and then upwards to shear a set of pins before ultimately jarring downwards to shear
the GS pulling tool pin.The tool can then be retrieved from the well bore.The double jar down adapter can also be run with the GS pulling tool shear pin removed,effectively
adapting the GS tool into a GR(shear up) tool.
5.13 Type GR Pulling Tool, also known as GU Adapter, is the converted version of GS Pulling Tool, to engage various of subsurface equipment with industry
standard internal fishing neck purpose, e.g. Lock Mandrel, and has the shear to release feature by jarring up to shear the pin. It is make up of
GU/Shear Up Adapter and Type GS Pulling tool of fish neck and shear pin removed.
5.14 Type PRS Pulling Tool is designed to engage and retrieve subsurface equipment with industry standard internal fishing neck and has the shear to release
feature by jarring down to shear the pin. Once the pin is sheared, the core spring feature will hold the tool in the release position.
5.15 Type BB & BE Pulling Tool is designed to engage external fishing necks on sub-surface controls within the well. The tool has no skirts and the dogs are
exposed, making this type of tool particularly useful for engaging fishing necks fouled by sand, trash or other debris.
5.16 #DoubleJarDownRunningPullingTool has been used with particular success as an alternative tool for running and pulling #GasLiftValves.
5.17 Heavy Duty Type Releasable Pulling Tool was developed to withstand high impact forces. The Tool incorporates a 360-degree coverage collet to maximise contact
on the fishing profile. This Collet is supported by the Bottom Sub to give increased load bearing capability. A Fish Neck Cage is positioned between the
Collet finger to support the fishing profile upon release, this ensures there are no 'hang ups', even when used in heavily deviated wells.
5.18 Bell Guide Tool is designed to fit over Pulling Tool and to provide centralisation within a large wellbore. The inner thread allows fishing tools such as pulling
tool or overshot to be threaded within the bell guide, then acting as a centraliser to run within a large wellbore and is particularly effective to fish small size tools found inside the tubing.
5.19 Releasing Tool is designed to manually remove latched device from standard R/S Pulling tool without removing the shear pin.
5.20 Type R/S Re-Pinning tool is an essential wireline tool kit designed to compress the main spring of the standard R/S Pulling tool by rotating the plate against
the skirt until shear pin holes are aligned for new pin to be inserted.
5.21 Type GS Re-Pinning Tool is an essential wireline tool kit designed to compress the main spring of the Type GS Pulling tool by rotating the plate against the
skirt until shear pin holes are aligned for new pin to be inserted.
5.22 Disassembly Tool for Type JD JU Pulling Tool Used for disassembly for Type JD/JU Tool.
5.23 Heavy Duty Pulling System has been designed to withstand extreme conditions during the retrieval of various downhole devices,especially
'problem fishing situations'where there is damage to internal/external profiles which can impede a successful operation.
The system incorporates a non-releasable 'Anchor' Pulling tool which can be equipped with either a Collet to suit conventional fishing necks,an
Internal Spear to suit various bores or a Grapple Style Overshot for varying external diameters.
The Lower 'Anchor'Tool can be deployed by either the Heavy Duty Pulling Tool or if preferred a standard running tool can be used on the standard fish neck provided.
If a shear up to release running tool is used once latched onto the fish,the running tool should be sheared and returned to surface leaving
the Lower 'Anchor'Tool ready to accept the Heavy Duty Pulling Tool.The Heavy Duty Pulling Tool is then run to dock with the lower non-standard fishing neck on the Lower'Anchor'Tool.
The Lower 'Anchor' Tool features a unique fishing profile designed to integrate with the exclusive Heavy Duty Pulling Tool,to give a clean strong union between neck and pulling tool for optimum
performance.
The Pulling Tool can be parted from the Lower 'Anchor'Tool by jarring down to shear a pin,this functions the Pulling Tool to the release position.The tool will lock at this position,using a springloaded
button,to prevent any unwanted Collet movement,which can complicate release.
5.24 Heavy Duty Universal Pulling Tool is designed for running and retrieving down hole flow devices.The tool is based on a collet to give maximum coverage
of the fishing neck and features unique supports between the collet fingers.The supports centralise the fishing neck preventing it hanging on the collet fingers
even in highly deviated conditions.A full sleeve both supports the collet and gives the tool a clean profile.
The heavy duty universal pulling Tool can be adapted from a shear-up to release to a sheardown to release tool,without the need for any
additional parts,it has a universal core which permits the same tool to be able to retrieve devices with fish necks of different lengths or reach(i.e. short,medium or long reach).
